- Home
- About Us
- Products
- News
- FAQ
- Contact Us
Send a Request
Leave Your Message
Direct-from-factory certified OEM aluminum ladders, suspended cradles, and structural formwork accessories built to withstand hyper-arid Middle Eastern construction conditions.
The Kingdom of Saudi Arabia (KSA) is undergoing an unprecedented construction renaissance spearheaded by the monumental Saudi Vision 2030 initiative. With multi-billion-dollar gigaprojects such as NEOM (The Line, Oxagon, Trojena), the Red Sea Global Destination, Qiddiya Entertainment City, Diriyah Gate Heritage Project, and the massive urban infrastructure expansion for the Riyadh Expo 2030 and FIFA World Cup 2034, the demand for certified, safe, and lightweight access equipment has surged exponentially.
Within this hyper-active industrial environment, the 10 Ft Aluminum Ladder has emerged as an indispensable utility benchmark across multiple trades. Offering an optimal reach height of approximately 14 to 15 feet (4.2 to 4.5 meters), 10 ft aluminum step and multi-purpose ladders precisely align with standard Gulf commercial ceiling heights, logistics warehouse racking tiers, and MEP (Mechanical, Electrical, and Plumbing) ductwork installations.
Our OEM manufacturing processes integrate advanced metallurgy and structural enhancements specifically formulated to counter high UV radiation, thermal expansion, and coastal salinity.
Extruded from virgin aluminum ingots, our 10 ft ladders deliver unparalleled strength-to-weight ratios. The structural framework provides extreme load bearing (rated up to ANSI Type IAA 375 lbs / 170 kg) while remaining effortless for a single technician to carry on busy job sites.
Equipped with 15-20 micron architectural clear anodizing, our ladder profiles resist blistering surface degradation in ambient temperatures exceeding +50°C in Riyadh summers, preventing structural embrittlement, salt spray corrosion in Dammam/Jeddah, and abrasive desert sand wear.
Featuring deeply knurled, hydraulic-riveted D-rungs or wide traction step treads, reinforced pinch-resistant internal spreader bars, and heavy-duty, oil-resistant anti-skid TPR rubber foot pads that provide uncompromising grip on dusty concrete and polished marble floors.
Designed for hazardous oil & gas downstream facilities operated by Saudi Aramco and SABIC contractors. Our aluminum climbing platforms eliminate frictional sparking hazards during routine inspection and electrical equipment maintenance.
OEM options include multi-joint folding ladders with heavy-duty steel lock mechanisms, transforming smoothly from a 10 ft straight leaning ladder into an A-frame stepladder, an uneven staircase access unit, or a stable low-level scaffolding work trestle.
Every batch manufactured in our 70,000 m² factory undergoes strict vertical load testing, cantilever deflection tests, dynamic drop tests, and cyclic hinge endurance checks to ensure 100% compliance with Saudi SASO customs clearance criteria.
From Riyadh's gleaming financial district towers to Jubail's expansive industrial complexes, our 10 ft aluminum ladders deliver trusted performance across critical economic sectors.
In major commercial ventures such as the King Abdullah Financial District (KAFD) and New Murabba in Riyadh, electromechanical contractors require rapid mobility between rooms and corridors. A 10 ft aluminum A-frame ladder provides the ideal elevation for ductwork balancing, fire sprinkler piping, cable tray installation, and architectural ceiling grid alignment without the cumbersome assembly time of modular steel towers.
In industrial hubs managed by MODON and Royal Commission cities (Jubail, Yanbu, Ras Al-Khair), maintenance engineers perform frequent valve inspections, pipe insulation overhauls, and sensor calibrations at heights between 3 and 4.5 meters.
Established in 1998, Tianjin Jinke Construction is a professional scaffolding and access equipment manufacturer based in Tianjin, China. With 28 years of manufacturing experience, we have grown from a local factory into a trusted international supplier.
Our story began in 1998 with a simple goal: to provide strong and safe scaffolding products. In the early years, we focused on improving production technology and quality control. As we grew, we invested in modern workshops and automated equipment to meet higher industry standards.
In 2012, we started our international business and quickly earned recognition from overseas buyers for stable quality and on-time delivery. Over the years, we have kept improving our products and services, attending global exhibitions and building long-term partnerships with customers from different countries, including major contractors throughout the Middle East and the Gulf Cooperation Council (GCC). Today, we remain committed to our original spirit: professionalism, quality and trust.
Electric suspended cradle gondolas engineered for high-rise commercial facade construction, exterior curtain wall glazing, and skyscraper maintenance.
Heavy-duty walk-through and masonry scaffold frames featuring rapid locking pins and hot-dip galvanized finishes for high-speed construction.
Modular multidirectional rosette scaffolding offering unmatched structural stability for complex civil engineering and bridge construction.
Precision 10 ft aluminum step, folding, and telescopic ladders, along with lightweight mobile towers for indoor and outdoor commercial maintenance.
Heavy-duty adjustable steel shoring props, push-pull props, and tripod supports designed for high-load slab formwork concrete casting.
EN39 / BS1139 standard scaffolding tubes, drop-forged double couplers, swivel clamps, and base jacks with strict dimensional tolerance control.
Combining 70,000 m² of modern robotic infrastructure, rapid sea port access, and bespoke OEM customization to serve Saudi importers, wholesalers, and general contractors.
Our factory covers 70,000 square meters with advanced processing workshops, automatic extrusion processing, assembly lines, and robotic precision welding workshops. Our annual output exceeds 300,000 tons, supporting large mega-project orders and continuous containerized supply.
We are located only 40 km away from the port of Tianjin, with exceptional transportation and logistics conditions. This ensures expedited container loading, direct maritime routes to Jeddah Islamic Port and King Abdulaziz Port in Dammam, and dependable on-schedule delivery.
We carry out strict quality inspection across every single production stage. All our products comply with GB / ASTM / DIN / JIS standards and have obtained authoritative certifications such as ISO9001, CE, SGS, and EN131, ensuring seamless SASO customs clearance.
Our seasoned engineering and international trade teams possess deep knowledge of Saudi import standards (SABER registration, SASO CoC certificates). We provide tailored OEM design, private label silk-screening, custom packaging, and technical documentation.
With superior quality control and standardized industrial management, we have received numerous honor certificates issued by the Tianjin Municipal Government and the Quality Supervision Bureau, proving our reliability as a tier-one supplier.
We offer complete customization for Middle Eastern buyers: customized rung profiles, embossed bilingual Arabic/English warning labels, heavy-duty duty ratings, colored anodized side rails, and high-density export protective packaging.
Our corporate culture is built on Quality First, Safety First, Customer Focus, and Continuous Improvement. We believe that good products come from strict management and responsible production. We value integrity, professionalism and teamwork, and encourage every employee to take pride in product quality and customer satisfaction.
We have a stable and professional team with rich experience in scaffolding production, ladder extrusion design, quality control, and international trade logistics. Our management system is standardized and efficient, covering production, safety, quality, and logistics. We pay close attention to employee training and team cooperation to ensure stable, high-quality operations for long-term development.
Essential details regarding SABER registration, custom OEM branding, minimum order quantities, and containerized sea freight logistics.
Our aluminum ladders and scaffolding systems are manufactured strictly in accordance with EN131, ANSI A14.2, and ISO 9001 standards. We provide complete test reports from accredited third-party labs (SGS/TUV) to support your SABER platform registration and issue the Certificate of Conformity (CoC) smoothly for fast customs clearance at Dammam and Jeddah ports.
Yes. As an experienced OEM factory, we offer comprehensive private label services including screen-printed brand logos, laser-etched serial numbers, customized colored plastic end caps, and bilingual (Arabic & English) safety compliance hazard labels compliant with Saudi Ministry of Human Resources occupational safety requirements.
We utilize certified 6063-T5 and 6061-T6 structural aluminum alloys with controlled wall thickness (1.2mm to 2.5mm depending on duty rating). These alloys offer optimal mechanical yield strength, superior weldability, and exceptional corrosion resistance in harsh coastal and high-temperature desert environments.
Standard OEM container production takes 20 to 30 days depending on order volume. Located just 40 km from Tianjin Port, we coordinate direct fast vessel bookings to Jeddah Islamic Port (approx. 22-26 days transit) and King Abdulaziz Port in Dammam (approx. 20-24 days transit).
Explore our full line of scaffolding platforms, formwork accessories, and industrial aluminum climbing ladders engineered for high-load durability.
