- Home
- About Us
- Products
- News
- FAQ
- Contact Us
Send a Request
Leave Your Message
Precision-fabricated modular towers and load-bearing slant supports optimized for confined stair shaft elevation and heavy-duty structural anchoring.
Reinforced diagonal stabilization brace providing critical lateral rigidity for stairwell scaffold tower elevations in dynamic construction sites.
All-directional multi-point locking modular tower system tailored for custom stair step height adjustments and rapid vertical progression.
Micro-adjustable height jacks enabling rock-solid leveling over multi-tiered stair risers, concrete landings, and steep commercial grade inclines.
Integrated internal ladder hatchway and slip-resistant decking designed to maintain clear emergency and logistical passage through stair cores.
Within modern multi-story civil engineering and commercial architecture, the vertical stair core serves as both the central structural spine and the primary logistical conduit during active erection phases. Elevating temporary work platforms inside these narrow, vertically expansive voids presents extraordinary geotechnical and structural challenges. Conventional ground-supported scaffolding fails in stairwells due to non-coplanar footing surfaces, sharp tread elevation shifts, and the strict requirement to preserve unobstructed human transit for multi-trade operations.
The specialized Stairwell Scaffold Tower addresses these intrinsic architectural constraints through high-yield Q235 and high-tensile alloy modular configurations. Featuring independently adjustable base legs, non-slip access trapdoors, and compact self-stabilizing frames, these towers convert perilous vertical shafts into secure, high-capacity staging zones for interior drylining, MEP (Mechanical, Electrical, and Plumbing) rough-ins, ceiling installations, and structural fireproofing.
State-of-the-art stairwell scaffold towers bridge the gap between heavy load capacity and agile assembly in tight construction spaces.
Equipped with heavy-duty telescopic screw jacks and swivel base plates capable of absorbing up to 45-degree angle variations and 600mm vertical step discrepancies without losing structural axial alignment.
Engineered with open-portal bottom frames allowing continuous transit of construction personnel, materials, and emergency response teams while heavy overhead elevation work proceeds safely above.
Utilizing high-frequency welded Q235 diagonal supports that disperse point loads and seismic resonance, mitigating tower deflection under high wind vortexes in unsealed shafts.
| Performance Parameter | Standard Stairwell Tower (Steel Q235) | Lightweight Aluminum Alloy Tower | Regulatory Benchmark Compliance |
|---|---|---|---|
| Safe Working Load (SWL) | Up to 450 kg/m² (Heavy Duty Class 4) | 275 kg/m² (Medium Duty Class 3) | EN 1004 / OSHA 1926.451 / ANSI A10.8 |
| Base Footprint Adaptability | 0.75m × 1.5m to 1.35m × 2.5m | 0.60m × 1.3m to 1.20m × 2.0m | Tread-to-Riser Dimension Adaptable |
| Max Free-Standing Height | 12.0 Meters (with internal tie-ins) | 8.5 Meters (with wall anchors) | 3:1 Height-to-Base Outdoor / 4:1 Indoor |
| Corrosion Protection | Hot-Dip Galvanized (≥ 85 μm coating) | T6 Structural Anodized Finish | ISO 1461 / ASTM A123 |
From supertall skyscraper construction cores to sensitive heritage building retrofits, stairwell towers provide unmatched adaptability.
During the primary mechanical rough-in phase, high-capacity ducting, heavy riser pipes, and smoke extraction dampening assemblies must be fastened to sheer vertical concrete walls. The stairwell scaffold tower acts as an elevated, rigid staging platform capable of supporting multi-person crews along with laser alignment instruments, pneumatic power tools, and high-mass conduit systems.
Application of spray-applied fire-resistive materials (SFRM) demands consistent 360-degree access to steel lintels and overhead precast slabs. The adjustable working elevation allows operators to maintain ergonomic standoff distances from surfaces, ensuring uniform film thickness and total coverage across all multi-story landing soffits.
Heritage structures frequently feature non-uniform stone steps, circular architectural geometry, and fragile historical plasters. The micro-adjustable base jacks and non-marring polyurethane outrigger pads enable custom stabilization on uneven heritage surfaces without puncturing or overloading delicate masonry.
In occupied commercial retrofits, building codes mandate uninterrupted emergency egress through main stairwells. Walk-through tower configurations allow building occupants and subcontractors to traverse the ground landings safely beneath overhead catch fans and protective kickboards while platform work continues above.
Established in 1998, Tianjin Jinke Construction is a professional scaffolding manufacturer and solution provider based in Tianjin, China. With 28 years of manufacturing experience, we have grown from a local factory into a trusted international supplier. Since 2012, we have been engaged in export business and now have more than 14 years of experience serving global customers. We focus on safe, reliable and high-quality scaffolding products to support construction projects around the world.
Our story began in 1998 with a simple goal: to provide strong and safe scaffolding products. In the early years, we focused on improving production technology and quality control. As we grew, we invested in modern workshops and automated equipment to meet higher industry standards.
In 2012, we started our international business and quickly earned recognition from overseas buyers for stable quality and on-time delivery. Over the years, we have kept improving our products and services, attending global exhibitions and building long-term partnerships with customers from different countries. Today, we remain committed to our original spirit: professionalism, quality and trust.
We specialize in the design, production and sales of scaffolding systems and accessories. Our main products include:
We provide full customization services for global clients, including private labeling, standard size customization and special non-standard products. All our products comply with GB / ASTM / DIN / JIS standards and have obtained authoritative certifications such as ISO, CE, SGS and EN.
Our products are widely used in exterior wall maintenance, urban construction, housing decoration, aerial work, shopping malls, airports, factories, engineering maintenance and other construction fields.
Proven engineering excellence, advanced robotics, and strict quality control supporting global tier-one contractors.
Our factory covers 70,000 square meters with advanced processing workshops, assembly lines and robotic precision welding workshops. Our annual output exceeds 300,000 tons, supporting large orders and stable supply.
Every structural weld on our stairwell scaffold components undergoes rigorous ultrasonic inspection and automated stress testing to ensure zero failure under critical working platform elevations.
We are located only 40 km away from the port, with excellent transportation and logistics conditions. This ensures fast, efficient and reliable delivery for every order.
We carry out strict quality inspection in every production process. Our products meet multiple international standards and hold authoritative certifications, ensuring safety and compliance for global projects.
We have an experienced technical team and sales team that understands customer needs deeply. We provide professional technical support, customized solutions and efficient after-sales service to solve any logistics or application problems.
With excellent quality and standardized management, we have received many honor certificates issued by the Tianjin Municipal Government and the Quality Supervision Bureau, proving our strength and reliability.
Our corporate culture is built on Quality First, Safety First, Customer Focus and Continuous Improvement. We believe that good products come from strict management and responsible production. We value integrity, professionalism and teamwork, and encourage every employee to take pride in product quality and customer satisfaction.
We have a stable and professional team with rich experience in scaffolding production, design, quality control and international trade. Our management system is standardized and efficient, covering production, safety, quality and logistics. We pay attention to employee training and team cooperation to ensure stable and high-quality operation for long-term development.
Explore our full catalog of high-load Q235 steel slant supports, modular ringlock towers, cuplock scaffoldings, and custom stair access accessories.
Essential high-strength diagonal brace for lateral stability and platform elevation anchoring in high-rise concrete shafts.
Industrial modular tower with rosette connections allowing 8-way directional adjustments in constrained elevator shafts.
Micro-adjustable heavy steel prop providing vertical shoring reinforcement beneath elevated landing working decks.
Engineered outrigger extension assemblies extending stable work platforms across open stairwell atriums.
Self-aligning base screw jacks compensating for variable riser heights and sloping industrial stair landings.
Rapid-erect cuplock node system with automated cup-locking action and full-perimeter fall arrest barriers.
Robust mechanical anchor bracket securing multi-level stair tower masts firmly to reinforced core walls.
Ultra-lightweight, non-sparking elevation platform system optimized for interior fit-out, MEP, and industrial cleanrooms.
